Chapter 4 : The Rear Panel
4. The Rear Panel
NOTE:
1. There are no operational components or interfaces on the front of the
MBB.
2. The UPS AC input, the UPS bypass input and the UPS AC output
marked with ❷ ❸ ❹ in
Figure 4-1
are originally covered, after removing
the cover, you can see them and conduct the connection. For the details
of connection, please refer to Chapter 6: Connection. Please note that
the cover should be reinstalled as the original state after you remove the
connection between the MBB and the UPS.
3. The AC input, the bypass input and the AC output marked with ❻ ❼
❽ in
Figure 4-1
are covered with a knockout cover respectively. When
conducting the connection, you have to remove the knockout covers
shown in Figure 6-1. For the details of connection, please refer to Chapter
6: Connection. Please note that the knockout covers do not need to be
reinstalled.
(Figure 4-1: The Rear Panel of the MBB)
8