Single Source Input & Three Phase Output - Delta Amplon MBB RT Series User Manual

(Figure 6-9: MBB Bus Bar Installation for Dual Source Input & Three Phase
Output Configuration)
6.3.4. Single Source Input & Three Phase Output
1. Install the bus bars by following Figure 6-10.
2. Connection to AC source (L1/ L2/ L3/ N): connect L1 to mL1or bL1; L2 to mL2
or bL2; L3 to mL3 or bL3; N to one of the UPS's N terminals.
3. Connection to the loads (L1/ L2/ L3/ N): connect the load's L1/ L2/ L3 to L1/ L2/
L3 respectively and the load's N to one of the N terminals.
27
Amplon RT Series