Design Details Of Vantage 5000; Vantage 5000 - An Overview - VERDER Verderflex Vantage 5000 Series Original Operating Manual

4.1

Design Details of Vantage 5000

The Verderflex Vantage 5000 range of tube pumps, provide a balanced selection of simple to operate peristaltic pumps.
The range offers the customer pump choices that are simple by design, with touchscreen interface and 4000:1 turndown
ratio with the stepper drive.
4.2

Vantage 5000 - an overview

A. SCREEN PROTECTOR
– Gently pull up the screen protector to touch the screen.
– Gently push the screen protector down after selecting the functions.
B. SCREEN MODULE
– Presents information to the user about the status of the pump.
– Accepts and implements the operators control instructions using the touchscreen.
– Use a suitable stylus or finger to select the functions. (g 6 User Interface - overview)
C. STOP BUTTON
– Stops the pump.
– RED LED illuminated when the pump is stopped
– FLASHING RED indicates an alarm or fault mode.
D. START BUTTON
– Starts the pump.
– GREEN LED illuminated when the pump is running.
– FLASHING GREEN LED indicates the pump is paused.
E. PUMP DOOR
– Must be closed for the pump to run.
– When opened during the operation, the pump will stop and the red led will flash.
F. CONTINUOUS TUBE CLAMP
– Clamps the loose tube in place or locate the tube assembly on fixed element pumps.
G. CONTINUOUS TUBE
A
B
C
D
Figure 2 Key Parts of the Pump
Vantage 5000
E
F
1.4v-09.2019
G
9 | Page