Example 5: View Or Recall A Preset - Extron electronics DXP Series User Manual

im Vertrieb von
Operation, cont'd

Example 5: View or recall a preset

The following steps show an example in which, on a DXP 44 SDI, the configuration
of a saved preset is shown in the LCD and then recalled to become the current
configuration. Each step shows the front panel indications that result from your
action.
1.
Figure 3-21 — Selecting view/recall preset mode
2.
Figure 3-22 — Selecting the preset
3.
4.
Figure 3-23 — Press Preset to exit
www.camboard.de
3-12 Digital XPoint Matrix Switchers • Operation
CAMBOARD Electronics
The switch mode, quick or enter, is for ties only and has no effect on recalling
presets.
Press and release the Preset button (figure 3-21).
1 2 3 4
OUTPUTS
PRESET
INPUTS
Press and release the Preset button.
The LCD displays the outputs. The
tied inputs are not shown until you
select a preset.
Press and release the Output 1 button (figure 3-22).
OUTPUTS
1 2 3 4
Press and release the Output 1
button. (The Output 1 button
selects preset 5 on a DXP 44 SDI.)
The button lights red.
= Blinking Button
To view a different preset, press and release a different input or output
button.
To stop viewing presets without recalling a preset, press and release the
Preset button (figure 3-23).
CONTROL
ENTER PRESET
Press the Preset button to The LCD returns to the
exit without recalling the default display.
preset.
All buttons return to unlit or
background illumination.
Tel. 07131 911201
Fax 07131 911203
CONTROL
1 2 3 4
OUTPUTS
ENTER PRESET _ 5 _
5
INPUTS
The Enter button The LCD displays
blinks red to indicate the preset's
that the preset is configuration.
available for recall. Each output is
listed on the top
line. The bottom
line shows the
tied input.
STATUS
E X T RON
D X P 4 4
ce-info@camboard.de