Using Global Memory Presets; Example 5: Saving A Preset - Extron electronics Matrix 50 Series User Manual

Matrix audio/video switchers
Hide thumbs Also See for Matrix 50 Series:
Table of Contents

Advertisement

Operation, cont'd
1
2
1
2
1
Figure 3-10 — Example 4f: Viewing the current configuration, video
only

Using global memory presets

The current configuration (configuration 0) can be saved as a preset in any one of
12 preset memory addresses.

Example 5: Saving a preset

See figure 3-11 and the following steps for an example of saving the current
configuration as a preset on a 12x8 Matrix 50 switcher with audio.
1
2
1
1
Figure 3-11 — Example 5: Saving the current configuration as
preset 1
A
B
C
3-10
Matrix 50 Series Switchers • Operation
LED key:
INPUTS
3
4
5
6
7
8
9
3
4
5
6
7
8
OUTPUTS
F
3
4
8
1.
Only the audio and video ties are stored and recalled; audio gain
settings are not saved, and they do not change when a preset is recalled.
2.
Presets cannot be viewed from the front panel unless recalled as the
current configuration. Presets can be viewed using Extron's Windows-
based control program. See chapter 5 for more details.
3.
The current configuration and all presets are stored in non-volatile
memory. When power is removed and restored, the current configuration
is still active and all presets are retained.
4.
When a preset is recalled, it replaces the current configuration, which is
lost unless it is also stored as a preset. The recalled preset overwrites all of
the current configuration ties in favor of the preset configuration ties.
LED key:
= off,
= on for 2 seconds, then off
2
C
INPUTS
2
3
4
5
6
7
8
2
3
4
5
6
7
8
OUTPUTS
Press and release the Esc button. The Esc LED turns on for approximately
2 seconds and turns off.
Press and hold the Preset button for approximately 2 seconds until the Preset
LED begins to blink, then release the Preset button.
Press and release the input 1 button. The input 1 LED lights for
approximately 2 seconds and turns off. The Preset LED turns off.
= off,
= on
10
11
12
ENTER
= on,
= blinking,
B
9
10
11
12
F
VIDEO
AUDIO
CONTROL
I/O
PRESET VIEW
ESC
VIDEO AUDIO
C
2
B
B
A
PRESET
ESC
CONTROL
I/O
ENTER
PRESET VIEW
ESC
VIDEO AUDIO

Advertisement

Table of Contents
loading

Table of Contents