Speed Adjustment; Operating Mode Ii: Laying Down The Pe-Pipe; Functional Description Of The Main Components - Bauer Rainstar TX Plus Series Operating Manual

CAUTION!
Shift gear shift lever into the desired position and return the shut-off lever to the "PE-pipe retraction" position.
The reel starts to wind up the PE-pipe.

21.4.1 SPEED ADJUSTMENT

With ECOSTAR 4300 - see page 16
With mechanical speed control - see page 34

21.5 OPERATING MODE II: LAYING DOWN THE PE-PIPE

see page 17

21.5.1 FUNCTIONAL DESCRIPTION OF THE MAIN COMPONENTS

21.5.1.1 MACHINE DRIVE – FULL-FLOW TURBINE
Operating manual for BAUER RAINSTAR
...and slacken the PE-pipe by pressing the shut-off lever
downward slowly and carefully.
Switching into gears1 to 4 is only possible when the turbine is rotating!
The TX20 full-flow turbine is a specifically designed turbine
model with large cross sections and minimum pressure loss.
Therefore it is also suited for high retraction speeds at very
low flow rates.
design and is mounted directly on the reel shaft.
the energy needed for PE-pipe retraction. The turbine speed
is taken directly off the impeller shaft and transmitted over a
V-belt drive to BAUER change-speed gearbox.
Series TX Plus
This turbine features a highly flow-promoting
It provides
68