Bauer Rainstar TX Plus Series Operating Manual page 4

General Safety Instructions
Symbols and terms
The CE symbol that has to be affixed on the machine by the manufacturer outwardly
demonstrates compliance of the machine with the directives for machines and other
relevant EU directives.
WARNING!
CAUTION
NOTE
Qualified operators are persons who on account of their training, experience and instruction as well as their
knowledge of relevant standards, rules, precautions to be taken for accident prevention, and prevailing
operating conditions, have been authorised by the person in charge of plant safety to perform the respective
tasks required, and in doing so are able to recognise and avoid potential hazards. Among other things,
knowledge of first-aid procedures is also required.
Product liability
As defined by the product liability law every farmer is also an entrepreneur!
According to §9 PHG (Product Liability Law), liability for damage to corporeal things caused by defective
products is expressly excluded. This exclusion of liability also applies to parts not manufactured by BAUER
itself but purchased from external suppliers.
Duty to furnish information
Even if the customer passes on the machine later-on he is obliged to hand the operating manual on to the new
receiver, too. The receiver of the machine must be instructed with reference to the mentioned regulations.
Intended use
 BAUER RAINSTAR is built exclusively for normal agricultural applications (intended use).
 Any use beyond this normal use is considered non-conforming. Manufacturer is not liable for damage
resulting from such non-conforming use, the sole liability for damage from non-conforming use is with the
user.

Intended use also includes compliance with the manufacturer's operating, maintenance and service
instructions.
 The BAUER RAINSTAR may be used and operated only by persons who are familiar with the device and
aware of the hazards involved.
 All rules for accident prevention as well as any other generally valid specifications and regulations relating to
safety, work medicine and traffic law must be strictly observed.
 Unauthorised modifications on the machine release the manufacturer from liability for damage resulting
therefrom.
IV
This "Warning" symbol refers to important safety instructions in this manual.
Whenever you see this symbol be aware of possible injury hazards. Read
the note following the symbol very carefully and inform the other operators
accordingly.
Non-observance of this instruction may cause damage to or destroy the
machine or individual components.
It is very important to observe this note or condition!
Manual for BAUER RAINSTAR
TX Plus