Speed Control With Ecostar 4300; Speed Adjustment With Mechanical Regulation ( Optional ) - Bauer Rainstar TX Plus Series Operating Manual

5.2.4 SPEED CONTROL WITH ECOSTAR 4300

CAUTION!
Set the required retraction speed with the arrow keys
in the operating mode of ECOSTAR 4300.
You can readjust the speed any time while the
machine is operating.
See Retraction speed control with ECOSTAR

5.2.5 SPEED ADJUSTMENT with mechanical regulation ( Optional )

CAUTION!
Lever up = slower
Lever down = faster
WARNING!
Operating manual for BAUER RAINSTAR series
Do not set the speed until half a PE-pipe winding has been wound up on the reel
and the pipe is already stretched.
Do not set the speed until half a PE-pipe winding has been wound up on the reel
and the pipe is already stretched.
Loosen the knurled nuts that secure the adjusting lever. Set
the desired retraction speed with the adjusting lever – the
speed is indicated on the tachometer (optional equipment).
Afterwards secure the adjusting lever again with the knurled
nuts.
The drive has four speed ranges (see Functional Description on page 16).
TX Plus 13