Status Display - Bauer Rainstar TX Plus Series Operating Manual

6.4 STATUS DISPLAY

STATUS:
EMERGENCY:
RUNNING:
LOW PRESSURE:
START:
START REMOTE:
START DELAY :
START PRESSURE :
START DENIED:
STOP USER:
STOP REMOTE:
STOP SENSOR:
STOP DISTANCE:
STOP DELAY:
STOP DENIED:
SUPERVISION TIME:
FORCE LOW PRESSURE: Machine opens shut-off valve to force pressure drop in order to stop the pump. After
PRE IRRIGATION:
POST IRRIGATION:
There are different constants that can be set by the user.
These constants will be saved for years even if the battery is disconnected.
Operating manual for BAUER RAINSTAR
Status messages in display
machine has not been started, speed impulses, however, are being received and it is trying
to maintain the speed requested.
Machine is irrigating, everything is working properly.
Water pressure is below pressure switch threshold. Machine acts depending on machine
data.
Operator has pressed „START"-button and the start sequence is in progress
Machine is starting due to an SMS.
Machine is waiting for start delay to elapse (see menu 4).
Machine has started due to pressure rise. Machine uses pressure level to start 2
machine on string.
Operator is holding „STOP"-button to prevent PRESSURE- and REMOTE start
zu verhindern.
Machine has stopped due to operator STOP.
Machine has stopped due to an SMS.
Machine has reached end and is stopped by STOP SENSOR.
Machine has reached distance for stop (see constant No. 8 for early stop).
Machine has reached stop but waits nn seconds to proceed stop sequence..
Operator is pressing „START"-button to prevent REMOTE stop.
Machine has stopped due to supervision time is elapsed. Machine has not moved in
nn minutes (see constant for supervision time)
2 minutes valve closes to prevent draining of pipe.
Machine is performing pre irrigation.
Machine is performing post irrigation.
Series TX Plus
nd
26