Complete Installation - Jenn-Air JS42NXFXDE Install

4.
Trim the skirt by scoring the proper "V" groove with a
utility knife. Break the skirt at the score line.
5.
Using the 2 screws, attach the base grille assembly to
the refrigerator as shown.
NOTE : Drive in the right side screw first.
A
18
A
A. "V" groove
A. Screws

COMPLETE INSTALLATION

1.
Turn the water supply line valve to the "Open"
position.
2.
Turn the refrigerator switch to the ON position. See
"Power On/ Off Switch" in the Use & Care Guide for
instructions. Wait a few minutes. Check the water line
connections for leaks.
3.
Remove all boxes, parts packages and packing
materials from the interior of the refrigerator. See
the "Cleaning" section in the Use & Care Guide for
instructions. Remove the film and cardboard from
the grille and doors or door frame, depending on your
model.
4.
Install the shelves and bins in the refrigerator and
freezer compartments.
5.
The controls are preset at the factory to the midpoint
setting. Check that the compressor is operating
properly and that all the lights are working.
6.
Flush the water system before use. See "Water
System Preparation."
To get the most efficient use from your new built-in
refrigerator, read the Use & Care Guide. Keep Installation
Instructions and Use & Care Guide near the built-in
refrigerator for easy reference.