Extron electronics IN1403 User Manual page 27

im Vertrieb von
Problem: The image on the display device is cropped on the right side.
•
Solution 1: Reduce the output H-Position to line up the image on the display device.
•
Solution 2: Adjust the monitor position or size controls to fit the image on the display
Problem: The image on the display device is cropped on the top.
•
Solution 1: Increase the output V-Position to line up the image on the display device.
•
Solution 2: Adjust the monitor position or size controls to fit the image on the display
Problem: The image on the display device is cropped on the bottom.
•
Solution 1: Reduce the output V-Position to line up the image on the display device. Use
•
Solution 2: Adjust the monitor position or size control to fit the image on the display
Problem: The display device has a double image.
•
Solution: The IN1403 cannot separate multiple signal formats. Make sure that only one
Problem: The image on the display device is black & white (no color).
•
Solution: Set the input signal format to match the input signal connected to the rear of
Problem: The picture on the display device has hooking along the top.
•
Solution 1: Increase the input horizontal tracking to compensate for poor quality video
•
Solution 2: The display device may need different sync serrations. Choose a different
Problem: The image is frozen.
•
Solution: Freeze is activated. Press FREEZE to deactivate the freeze frame feature.
Problem: The image on the display device is the wrong shape.
•
Solution: The input aspect ratio is set incorrectly. Adjust the input aspect ratio to match
Problem: The image on the display device appears fuzzy.
•
Solution 1: Adjust the video sharpness until the image regains its detail.
•
Solution 2: Adjust the video noise filter until the image is sharp.
•
Solution 3: Change the comb or trap filter setting (applicable only in composite video
Problem: The Output Resolution will not decrease.
•
Solution: The IN1403 can only scale up. Resolutions that would result in scaling down
www.camboard.de
CAMBOARD Electronics
Use the blue screen.
device. Use the blue screen.
Use the blue screen.
device. Use the blue screen.
the blue screen.
device. Use the blue screen.
signal is connected to each input.
the unit.
signals, such as from a VCR.
output sync from the sync format menu.
the input video signal.
mode).
are not available.
IN1403 User's Manual
Tel. 07131 911201
Fax 07131 911203
25
ce-info@camboard.de