Pin Assignment; Fig. 7-22: 9-Pin D-Sub Female Connector Strip; Fig. 7-23: Pin Assignment Profibus Dp - Bosch Rexroth IndraControl VCP 05.2 Project Planning Manual

R911310377 / 02 | Rexroth IndraControl VCP 05
Interfaces

7.3.2.1 Pin Assignment

Electric Drives and Controls | Bosch Rexroth AG
1. Female Connector X5 (Ethernet)
2. Female Connector X6 (PROFIBUS)
3. Female Connectors X9, X10 (USB Host - Type A)
4. Threaded Bolt for Protective Grounding
5. Connector X1 (Supply Voltage)
6. Diagnostics LED (PROFIBUS-DP)

Fig. 7-22: 9-pin D-SUB female connector strip

Connector in the small operator terminal: 9-pin D-SUB female connec-
tor strip
Pin Designation Function
1 nc Not Connected
2 nc Not Connected
3 RxD/TxD-P Received Data / Transmitted Data Plus
4 CNTR-P Repeater Control Signal Plus
5 DGND Data Transmission Potential
6 VP Supply Voltage of Terminators Plus
7 nc Not Connected
8 RxD/TxD-N Received Data / Transmitted Data Minus
9 CNTR-N Repeater Control Signal Minus

Fig. 7-23: Pin assignment PROFIBUS DP

The D-SUB connector strips must be shielded sufficiently. See chapter
"Shielding D-SUB Connectors" on page 7-15.
7-13