Bosch Rexroth IndraControl VCP 05.2 Project Planning Manual page 13

R911310377 / 02 | Rexroth IndraControl VCP 05
Safety Instructions for Electric Drives and Controls
Electric Drives and Controls | Bosch Rexroth AG
• Furthermore, they must be trained, instructed and qualified to switch
electrical circuits and equipment on and off in accordance with tech-
nical safety regulations, to ground them and to mark them according
to the requirements of safe work practices. They must have ade-
quate safety equipment and be trained in first aid.
• Only use spare parts and accessories approved by the manufactur-
er.
• Follow all safety regulations and requirements for the specific appli-
cation as practiced in the country of use.
• The equipment is designed for installation in industrial machinery.
• The ambient conditions given in the product documentation must be
observed.
• Use only safety features and applications that are clearly and explic-
itly approved in the Project Planning Manual.
• For example, the following areas of use are not permitted: construc-
tion cranes, elevators used for people or freight, devices and vehi-
cles to transport people, medical applications, refinery plants,
transport of hazardous goods, nuclear applications, applications
sensitive to high frequency, mining, food processing, control of pro-
tection equipment (also in a machine).
• The information given in the documentation of the product with re-
gard to the use of the delivered components contains only examples
of applications and suggestions.
The machine and installation manufacturer must
• make sure that the delivered components are suited for his individual
application and check the information given in this documentation
with regard to the use of the components,
• make sure that his application complies with the applicable safety
regulations and standards and carry out the required measures,
modifications and complements.
• Startup of the delivered components is only permitted once it is sure
that the machine or installation in which they are installed complies
with the national regulations, safety specifications and standards of
the application.
• Operation is only permitted if the national EMC regulations for the ap-
plication are met.
• The instructions for installation in accordance with EMC require-
ments can be found in the documentation "EMC in Drive and Control
Systems".
• Technical data, connections and operational conditions are specified
in the product documentation and must be followed at all times.
The machine or installation manufacturer is responsible for compliance
with the limiting values as prescribed in the national regulations.
• Technical data, connections and operational conditions are specified
in the product documentation and must be followed at all times.
3-3