Table Of Contents - E.T. Systems DC BLUE ADVANCED Installer's Instructions

Table of Contents

Table Of Contents2
Safety Precautions3
Technical Specifications4
Component Identification And Descriptions5
Hardware Installation6
Installing Manual Override Clutch Assembly Onto Sledge/Traveller6
Standard Single Track Or Double Track Sectional Garage Door Method7
Installing The Wall Mount Bracket7
Installing The Drawbar And Hanging Straps7
Installing The Door Mount Bracket8
Installing The Link Arm8
Testing The Mechanical Drive And Linkage8
Trackless Tip-Up Door9
Installing The Link Arm And Hanging Straps10
Attaching The Motor-Head To The Drawbar11
Attaching The Battery To The Drawbar11
Supplying Household Power To The Motor-Head11
Optional Extra Devices Wiring Connections12
Control Panel Dashboard And Programming Menu Summary13
Exit Button13
Programming14
Open And Closed Limit Position Setup And Door Load Profiling14
Setting The Obstruction Force Sensing, Safety Level15
Safety Obstruction Sensing In Action15
Activating Safety Beam Mode16
Activating The Auto-Close Mode And Selecting An Auto-Close Time17
Learning A Transmitter Code In The Receiver Memory19
Clearing A Single Transmitter Button Code From The Receiver Memory20
Master Erasing All Transmitter Button Codes From The Memory21
A Quick Method Of Learning A Transmitter Button Code22
Basic Operating Features23
Basic Open And Close Triggers Using The Button Trigger23
Advanced Operating Features25
Advanced Triggers Using The Remote Button Trigger25
Advanced Triggers Via Remote Button Trigger And Courtesy Light Trigger26
Lock Modes - Strike Lock Mode27
Magnetic Lock Mode28
Auto-Close Feature29
Safety Beam Input29
Courtesy Light30
Warning When Using A Button Trigger From Standby Mode31
Warning When Attempting To Program The Open And Closed Limits31