Example 3. Using the remote (BT) button trigger to disable any closing triggers
Press and release either
the remote button
trigger or the hardwired
trigger.
Stop door while opening
or simply wait until it
reaches the open
position.
Press and hold the
remote button trigger,
+/- 10 seconds, until
buzzer beeps.
Any attempt to operate
the door normally.
Press and hold the
remote button trigger +/-
10 seconds, until buzzer
beeps.
ET DC BLUE ADVANCED INSTALLER 2012.025.12.05.2014
ADVANCED OPERATING FEATURES
Advanced triggers using the remote (BT) button trigger
Action
(PARTY MODE)
TO ACTIVATE
Door in the closed
position.
Courtesy light off.
Door begins opening
and courtesy light
switches on.
Door stops and waits at
the required open
position. Courtesy light
remains on for a further 3
minutes.
Buzzer beeps rapidly to
indicate party mode is
active.
TO CONFIRM
Buzzer repeats rapid
beeps to indicate the
party mode is still active.
The door will not move.
TO DE-ACTIVATE
Buzzer beeps once and
door starts closing.
Courtesy light switches
on for three minutes.
25
www.et.co.za
Response
Rapid
Rapid
Need help?
Do you have a question about the DC BLUE ADVANCED and is the answer not in the manual?
Questions and answers
After loadshesding my roll up door is going up but doesn't god down again. And there is a red light flashing on the box.
How to replace the globe