Download Print this page

Slide R Ck Positions; To Begin Cooking; Rotisserie Cooking - Black & Decker CTO7100B Use And Care Book Manual

Digital rotisserie convection oven
Hide thumbs

Advertisement

Table of Contents
• You can change the temperature from ˚F to ˚C by pressing the Timer (▲) and (▼)
button at the same time.
• Once the selected temperature has been reached both the time and temperature can
be changed at anytime during the cooking.
• When using convection it is not necessary to change the temperature from that
suggested by the package or the recipe. However, the baking time may be shorter;
check foods frequently during baking to check for doneness.
• When using the rotisserie it is suggested that foods be placed into a cold oven.
• The oven is preset for temperature and time for medium toast (4 setting). Use this for
your first cycle then adjust lighter or darker to suite your taste.
• What is convection? Convection uses an internal fan that provides continuous
circulation of hot air around the cooking food; the food is more evenly cooked and in
some cases, is cooked faster.
SLIDE R CK POSITIONS
There are 4 possible positions for the slide racks. There is an upper and a lower slot;
the rack can also be inverted for 2 additional positions (E).
Position 1
Use lower slots
along oven walls.
Insert rack using a
rack-down position.
Position 3
Use upper slots
along oven walls.
Insert rack using a
rack-down position.
E

TO BEGIN COOKING

To start cooking a series of buttons must be pressed (F).
1. Select type of food to be cooked: a digital display will show
apreset temperature. On indicator light blinks YOU H VE
5 SECONDS TO PROCEED.
TIMER
350
2. To change press (▲) or (▼).
TEMP
Note:
• Tap button for temperature to change in 5 degree increments
BAGEL
• Press and hold to change in 25 degree increments
TOAST
BAKE
BROIL
• The minimum temperature is 200˚ F.
COOKIES
PIZZA
• The maximum temperature is 450˚ F.
FROZEN
POTATO
SNACKS
• To select preset temperature, press TIMER button
YOU H VE 5 SECONDS TO PROCEED.
TIMER
TIMER/TEMP
CONV
3. Select time: a digital display will show a preset time. To change
TOAST
press (▲) or (▼).
START/STOP
Note:
ROTISSERIE
ON
OFF
• Tap button for time to change in 1 minute increments
F
• Press and hold to change in 10 minute increments
7
• The minimum time is 1 minute
• The maximum time is 2 hours
• Press ST RT/STOP button
• To select preset time press ST RT/STOP button
4. Press CONVECTION if using B KE mode and would like to use convection.
5. The oven starts pre-heating and will display the rising temperature beginning
with "Lo" until the selected temperature is reached. The oven will beep.
6. The display will alternate between temperature and time as the clock runs down.
The time will count down in 1 minute increments until the last minute when it
will count down the seconds.
7. t end of cooking cycle oven turns off and there are 3 beeps.
8. Time and temperature can be changed once the selected temperature has been
reached.
9. End the cooking cycle at any time by pressing the Start/Stop button.
10. Convection can be turned on or off at any time.
Note: Keep oven unplugged when not in use.
Position 2
ROTISSERIE COOKING (G)
Use lower slots
along oven walls.
Insert rack using a
rack-up position.
Position 4
Use upper slots
G
along oven walls.
Insert rack using a
Tip: For versatility, rotisserie spit forks are designed to bend slightly to accommodate
rack-up position.
various food shapes and sizes. void excessive bending of spit forks as they may get
damaged.
3. Slide second fork onto pointed end of spit with pointed ends facing the food. Continue
until forks are securely imbedded into the food. Tighten the wing nut.
H
5. Insert slide rack into position "1". Line bake/broil pan with foil and place on rack to
catch drippings.
6. Follow directions "To Begin Cooking", steps 1-4, pages 7-8. Use Guide for suggested
roast times. Check doneness with meat thermometer.
1. Insert pointed end of spit through one of the forks with
pointed ends of fork facing toward the center of the spit.
Slide the fork toward the square end of the spit and
tighten the wing nut.
2. Insert spit through center of food to be cooked until fork
is securely embedded in food.
4. Check that food is centered on spit by
placing pointed end of spit into the drive
socket on the right oven wall. Rest the
square end of the spit in the support on
the left oven wall. Press rotisserie button
and allow food to make one full rotation
to be certain food is evenly centered and
does not touch the top heating elements
or the bake/broil pan when rotating (H).
8

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Black & Decker CTO7100B