Safety Instructions - Labomed Prima OPH User Manual

2

SAFETY INSTRUCTIONS

1. This microscope is manufactured according to the safety norms as per CE regulation and FDA.
2. This microscope is intended for use only as prescribed in this manual.
3. Servicing and repairs are allowed through authorized persons only.
4. Replace burnt out fuses by live fuses of the same type only (rated voltage, rated current, switch
– off characteristics.)
5. Use mains plug and mains socket both with protective earth conductors only.
6. Do not use force while fixing cable connections. If the male and female parts do not readily
connect, make sure that they are appropriate for one another. If any of the connectors are
damaged. Please contact the representative.
7. Make sure that inlets and outlets of ventilation system for cooling the housing are open (not
covered).
8. The microscope is built for use in dry rooms only. Take care that no fluids enter the microscope
components. Do not place any fluid-filled container on top of instrument.
9. Microscope is protected against overheating through a thermal cut-off.
10. The manufacturer will not accept any liability for damage caused by unauthorized persons
tampering with the instrument; this will also forfeit any rights to claim warranty.
11. It is recommended to use the instrument only with the accessories supplied. In case you wish to
use other accessory, make sure that LABOMED has certified that its use will not impair the
safety of instrument.
Very important : For identification, service people must know the serial number of the
microscope.
Intended Use:
The Prima OPH is a universal instrument for operative and diagnostic medical use. It is useful for
optimal illumination and magnification of the attendance area with the possibility of:
1. Manual variations of magnification
2. Motorized focusing (Z-axis) through foot control
3. Motorized centering of attendance area in XY directions through a Joystick provided on the foot
control (applicable to the suitable model)
Prima OPH
2