Fix the external conveyor (5) on the external wall mounting part (4e) till the complete assembly, as
shown in the pictures below:
2) ELECTRICAL CONNECTIONS
Installation must only be carried out by qualified person. Make sure that the voltage of the
installation room is in compliance with the value declared on the product label.
Make sure that the main electrical supply in the installation room is disconnected before electrical
assembly operations.
Identify the version of the product and carefully read all the instructions related to electrical
connections.
As done by marking the external holes, insert the centering diameter of the internal wall-mounting
part (4i) within the recessed duct (6) as shown in the picture above.
By using a measure level tool, mark and make four holes to fix on the wall the internal wall-
mounting part (4i).
28