Contents 13.2 Making cappuccino and hot milk with the Professional Cappuccino Frother ....page 12 JURA IMPRESSA E10/20/25 13.3 Making cappuccino with the 1. Safety information..........page 6 Easy Cappuccino Frother ......page 13 1.1 Warning..........page 6 13.4 Cleaning the Professional Cappuccino 1.2 Precautions..........page 6 Frother and Easy Cappuccino Frother ..page 13...
You will also find useful tips on operation and maintenance dishwasher. of your IMPRESSA E10/20/25 on the website at www.jura.com. Make sure to install the machine at a place with sufficient air circulation, to prevent overheating of the machine. 1. Safety information 2.
(e.g.during holi- of your JURA coffee machine is not suitable for coffee beans days). which were treated, during or after roasting, with additives (e.g.
Level 1 German water hardness range 1 – 7°, flashes French water hardness range 1.79° – 12.53° lights up Level 2 German water hardness range 8 – 15°, If symbol flashes on the display (7), you need to fill up the French water hardness range 14.32°...
5.1, Installing the filter lights up, lights up Press the maintenance key (4). Your IMPRESSA E10/20/25 is switched off. lights up, lights up Fold up the cartridge holder in the water tank. Now insert the filter cartridge in the water tank, applying gentle pressure Remove the water tank (11) from the machine and empty it.
6. IMPRESSA E10/20/25 rinsing upon display You can change/stop the water quantity during the draw-off operation, too. request When the IMPRESSA E10/20/25 was switched off and has 8. Drawing off 1 cup of coffee cooled down in the meantime, a rinsing operation is started when the machine is switched on again.
You can adjust the water quantity before the draw-off opera- lights up, lights up tion using the water quantity switch (1). The adjusted value Open the cover of the filler funnel for pre-ground coffee (9). (ML) refers to 1 cup. Fill 1 or 2 level spoonfuls of pre-ground coffee in the filler funnel for pre-ground coffee (9) (Fig.
12. Drawing off steam 13.1 Attaching the Professional Cappuccino Frother or the Easy Cappuccino Frother to the Install the replaceable steam/frothing jet (Fig. 6). This is in- IMPRESSA E10/20/25 cluded in your Welcome Pack. Do not replace the re- placeable steam/hot water jet (13) directly after drawing off Remove either the replaceable hot water jet (Fig.5) or the steam, because the jet is hot after the draw-off operation.
Frother or the Easy Cappuccino Frother runs clean. Refer to Chapter 4 «Adjusting the water hardness». The Professional Cappuccino Frother and Easy Cappuccino Frother are best cleaned using the JURA Auto-Cappuccino cleaner. Please contact an authorized dealer. We recommend cleaning these devices daily.
15.3 Programming the automatic switch-off time 16.2 Emptying the coffee grounds container You can programme your IMPRESSA E10/20/25 such that it lights up will switch off automatically after a certain time. You can select either inactive or 0.5 – 8 hours. If this message appears on the display, you can no longer draw off coffee.
(chapter 17) within the next few days. (Fig. 17). The water tank should be rinsed daily and refilled with fresh JURA cleaning tablets which are specially designed for the water. cleaning program of your IMPRESSA E10/20/25 are avail- able at your authorized dealer.
Fill in the tablet (see Fig. 15) JURA de-scaling tablets which are specially designed for the Press the maintenance key (4). de-scaling program of your IMPRESSA E10/20/25 are avail- lights up able at your authorized dealer. Please note that machine de-...
Please return the IMPRESSA E10/20/25 machine to your local lights up, lights up dealer, the service shop or to JURA for proper disposal. After you have closed the steam / hot water draw off tap (12), the following message is displayed...
20. Tips for perfect coffee Height-adjustable coffee spout (15) You can adjust the height of the coffee spout to the size of your cups (Fig. 3) Grinding degree Refer to Chapter 2.5 «Adjusting the grinding gear». Preheating cups You can preheat the cups using hot water or steam. The smaller the coffee you want to draw off, the more important preheating is.
- switch off lights up - disconnect from mains supply - Connect IMPRESSA E10/20/25 to power supply - Switch on IMPRESSA E10/20/25 Please have your IMPRESSA E10/20/25 checked by the JURA customer service in the event of all other ERROR messages.
Pre-ground coffee too fine Use a coarser pre-ground coffee High-frequency, electromagnetic interference may influence the display. Drawing off coffee is possible at any time. If the messages or problems still persist, please contact your local authorized dealer or JURA Elektroapparate AG.
Any Pump pressure: static max. 15 bar obligations to be fulfilled by JURA Elektroapparate AG are stipu- Water tank: 1,9 Liter lated in the corresponding purchase contract, which also contains the full and solely applicable warranty stipulations.