Download Print this page

Advertisement

Quick Links

Jura Impressa E80 & E85
1.
Plug machine into power point and switch on at point. Make sure both drip trays section is pushed in
properly.
2.
Open right-hand top lid and fill right-hand top container with Beans.
3.
Press top left start button on. Machine will read in
ring is on.
4.
Turn left-hand rotary switch until
rotary switch to lock in language.
5.
Open left-hand top lid and lift out water tank and half fill with fresh
machine (vertically sliding downward).
6.
Place 500ml container under steam/water spout (right). Turn right-hand top rotary switch one-quarter
turn to left. Machine will now fill –
right rotary switch.
- Your machine will now display
7.
Press
"MAINTAINANCE
water filter install.
INSERTING THE CLARIS FILTER CARTRIDGE
1.
Remove water tank from machine. Open filter retainer lid by pressing tab in and lift retainer up.
2.
Remove filter supplied from blue packet. Place small end down into bottom of tank vertically. Close
filter retainer lid and clip back to lock in. Fill water tank to 'max' line. Place tank back in machine.
3.
Press and hold
4.
Push rotary switch
displayed. Push rotary once to lock-in yes
5.
Place 500ml container under steam spout (right). Turn right-hand rotary quarter turn left.
"FILTER RINSING"
6.
When rinsed
will then display.
7.
"READY"
will now display. Your filter is now programmed in.
Visit our website; www.abs.juraworld.com for hints and recipes on your new E85 and accessories
PLEASE READ ALL WARRANTY DETAILS BEFORE OPERATING MACHINE!
C:\Users\Admin\Documents\Jura Manuals\E Series\E80 Black\JuraE80-85quickSsetUp.doc
Quick Set-up
"LANGUAGE ENGLISH"
"FILTER WATER - OPEN TAP"
"SYSTEM FILLING"
"HEATING"
BUTTON". Top right next to start button. Now your E80/E85 is ready for
"P"
button next to left-hand rotary switch.
"NO'
will be displayed. Turn rotary one notch (left or right) until
will display. Machine will rinse off 500ml of water.
"SHUT TAP"
will display. Close right-hand rotary quarter turn to right,
See page 78 of Instruction Manual for coffee settings etc.
"GERMAN"
text. Rotary switch red illuminated
is displayed. Then press centre of
will be displayed. Upon request – close
then
"PRESS
RINSE".
"FILTER"
"INSERT/OPEN TAP"
Advanced Beverage Systems
Po Box 201
FAIRY MEADOW NSW 2519
PH: 1300 552 883
FAX: 02 4284 6099
will be displayed.
COLD
water. Place back onto
will display.
"YES"
will display.
"HEATING"
is

Advertisement

loading

Summary of Contents for Jura Impressa E80

  • Page 1 Jura Impressa E80 & E85 Quick Set-up Plug machine into power point and switch on at point. Make sure both drip trays section is pushed in properly. Open right-hand top lid and fill right-hand top container with Beans. Press top left start button on. Machine will read in “GERMAN”...
  • Page 2 C:\Users\Admin\Documents\Jura Manuals\E Series\E80 Black\JuraE80-85quickSsetUp.doc...

This manual is also suitable for:

Impressa e85