E This chapter applies to the professional fine foam frother and frother the fine foam frother. After each milk preparation, the JURA prompts you to perform a milk system rinse. E In programming mode, you can set whether the milk system rinsing is to be prompted 10 minutes after preparation or initi- ated automatically (see Chapter 4 ‘Permanent settings in pro-...
If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T Use only original JURA maintenance products. E JURA milk system cleaner is available from specialised dealers. E To clean the milk system, use the container supplied. T Press the ‘ Pc ’...
Your JURA will not prompt you to dis- mantle and rinse the professional fine foam frother. T Remove the milk pipe and rinse it thoroughly under running water.
E8/E80 – Quick Reference Guide Changing the filter E Once the filter cartridge stops working (depending on the water hardness setting), the JURA will prompt you to change the filter. E CLARIS Smart filter cartridges are available from specialised dealers.
Cleaning is now complete. The start screen is displayed. Descaling the machine The JURA builds up deposits of limescale over time and automati- cally prompts you to descale it when necessary. The degree of calci- fication depends on the hardness of your water.
Page 8
‘Agent in tank’ T Remove and empty the water tank. T Completely dissolve the contents of one blister (3 JURA des- caling tablets) in a receptacle holding 500 ml of lukewarm water. This may take several minutes.
T Remove the water tank. T If you use a CLARIS Smart filter cartridge, remove this. T Completely fill the water tank and dissolve 3 JURA descaling tablets in it. T Leave the water tank with the descaling solution for several hours (e.g.
Need help?
Do you have a question about the E8 and is the answer not in the manual?
Questions and answers