Sunny Health & Fitness SF-RB4880 User Manual page 18

Drawing 31
5. During personal profile setting, you can press RESET to correct setting. Press BODY FAT key again to
go back to previous workout status.
※ Error code display during measurement:
E-1--- user not hold pulse sensors correctly (Drawing 33)
E-4--- Body Fat% exceed setting range 5.0%~ 50% (Drawing 34)
Drawing 33
KILOMETERS OR MILES
1. In stop mode, using three fingers, press MODE, START/STOP, RESET sequentially and hold at the same
time for a few seconds.
2. Press and hold MODE, then press RESET and continue pressing both keys for a few seconds until the
display changes. F01 will display in DISTANCE window, 78 will display in CALORIES window. Do not set
any data. (Drawing 34).
3. Press MODE to select F02, use + or - to change from kilometers or miles. 0 is for KM (Drawing 35), 1 is
for ML (Drawing 36).
4. Press RESET to restart the meter.
Drawing 34
MP3 Function:
You can connect mobile or music player to meter with audio cable (included) for MP3 function.
(Reminder: meter only has the function of power amplifier but not read memory card.) Music is controlled
from the mobile or music device.
USB power charger: The meter can provide USB charger for tablet or smart phone. Plug the data cable into
USB port for charging (cable not included).
Note:
After 4 minutes without pedaling or pulse input, meter will enter into power saving mode. Press any key to
turn the meter on.
Drawing 32
Drawing 34
Drawing 35
18
Drawing 36