Sunny Health & Fitness SF-RB4880 User Manual page 9

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at
907-8669).
support@sunnyhealthfitness.com
Figure B
STEP 5:
Attach the Pedals (No. 18L/R) to Cranks (No.
17L/R).
NOTE: Make sure to attach Right Pedal (No.
18R), marked (R), to the Right Crank (No. 17R).
It should be tightened clockwise. Attach the Left
Pedal (No. 18L), marked (L), to the Left Crank
(No.17L). It
counterclockwise. Attaching the Pedals (No.
18L/R) to the wrong Cranks (No. 17L/R) or
turning it the wrong direction can damage the
Cranks (No. 17L/R).
STEP 6:
Remove 4 Screws (No. 28) and 4 Flat Washers
(No. 43) from the Seat Fixed Bracket (No. 46)
using Allen Wrench (No. 96).
Attach the Seat Bracket (No. 50) to the Seat
Fixed Bracket (No. 46) using 4 Screws (No. 28)
and 4 Flat Washers (No. 43) that were just
removed. Tighten and secure with Allen Wrench
(No. 96).
Note: There are 3 positions on the Seat Fixed
Bracket (No. 46), numbered 1, 2, and 3, that you
can install the Seat Bracket (No. 50). Adjust the
seat position to suit your height. (Figure B)
Connect the 2 Pulse Wires (No. 45) with 2 Pulse
Extension Wires 3 (No. 44) on the Main Frame
(No. 1).
Remove 2 Screws (No. 40) from the Axle (No.
39). Attach the Handle (No. 41) to the Axle (No.
39) with 2 Screws (No. 40) that were just
removed. Tighten and secure with Allen Wrench
(No. 96).
9
or 1-877-90SUNNY (877-
should be tightened