Yealink T19P-E2 Configuring Manual page 40

Yealink IP Phones Configuring Guide
Paging List
You can use this key feature to view a list of multicast paging groups. For more information,
refer to Multicast Paging
Dependencies:
Usage: Press the DSS key to view a list of multicast paging groups.
Prefix
You can use this key feature to add a specified prefix number before the dialed number.
Dependencies:
Usage: Press the DSS key when the phone is idle, the phone will then enter the pre-dialing
screen and display the prefix number that you specified in the Number field. You can enter the
remaining digits and then dial out.
Private Call Hold
Hold feature allows any shared line to retrieve the held call. While private call hold only allows
the hold party to retrieve the held call.
Dependencies:
Usage: Press the DSS key to place the active call on private hold.
Speed Dial
You can use this key feature to speed up dialing the numbers frequently used or hard to
remember.
Dependencies:
Usage: Press the DSS key to dial out the number specified in the Number field, using the
account selected from the Line field.
Trace Call
Customer Originated Trace allows users to record the details of any malicious or harassing
incoming calls to their lines. The user can press the trace call key either during (using a separate
Call Appearance on the line the unwanted call was received on) or after the call. This produces
a record that the Service Provider can access, and will contain the calling party ID if this is
30
on page 60.
Soft key action (Paging List)
Label (key label displayed on the LCD screen)
Soft key action (Prefix)
Number (the prefix number)
Label (key label displayed on the LCD screen)
Soft key action (private call hold)
Label (key label displayed on the LCD screen)
Soft key action (Speed Dial)
Line (the account this feature will be applied to)
Label (key label displayed on the LCD screen)
Number (the number you want to dial out)