Before You Begin Cleaning - WERTHEIM SE2000 User Manual

INSTRUCTIONS FOR USE

Before You Begin Cleaning

IMPORTANT: Do not use the carpet shampooer as a dry vacuum.
Note: Vacuum carpet thoroughly. Use a vacuum cleaner with a
powerbrush for best results.
Note: Remove as much furniture from the room as possible. If unable to
remove the furniture, place plastic or foil under and around the legs until
the carpet has dried completely.
1. For heavily soiled areas, additional applications may be necessary.
2. Allow plenty of time for carpet to dry thoroughly.
3. Wipe cleaning solution from woodwork and wood to prevent
any damage.
4. Try not to walk on carpet until it is completely dry.
5. After carpet is thoroughly dry, vacuum the carpet using a vacuum
cleaner with a powerbrush.
6. Before cleaning, determine an exit path, making sure not to walk over
previously cleaned areas.
Check for Colour Fastness
Before cleaning the carpet, test for colour fastness. Dampen a white
cloth with solution. Test a small area of carpet in a closet. Gently rub the
cloth over the carpet. Check each colour for colour bleeding. If the
cloth remains clean, it should be safe to clean the carpet.
5