Clearing Powerhead Obstructions - Resetting Powerhead; Problems And Troubleshooting - WERTHEIM 7000 Instruction Manual

CLEARING POWERHEAD OBSTRUCTIONS - RESETTING POWERHEAD

OFF
Make sure the machine
is also disconnected
from the power source.

PROBLEMS AND TROUBLESHOOTING

If a problem occurs it can usually be solved by referring to the checklist below. If your problem
can not be fi xed using these tips, please contact our customer support centre (1800 815 270)
who will be happy to help.
PROBLEM POSSIBLE CAUSE
Motor does not start
or stops
Suction force
gradually decreases
Powerhead
not working
Roller not rotating
on powerhead
No power supply
The dust bag is full, fi lters are
dirty, suction hose or wand
is blocked
No power supply to powerhead
Reset button has tripped
Powerhead is not switched on
The belt is broken
Be sure to completely
remove all obstructions
before pressing the
reset button.
SOLUTION
Check cord, plug
and socket. If still
inoperative contact
service agent
Empty the dust bag,
clean or replace fi lters,
remove objects from
hose and wand
Ensure that the switch
on the handle and
powerhead is switched on
Make sure the roller is
clean and then press the
reset button (see above)
Check the powerhead
is switched on
Contact the service agent
9