Percussion Play Duo Installation Instructions

Installation Instructions

Ground Fixed
Duo
Page 1 of 3
Instrument
Components:
x8
M8x25 Security Screw
x4
M6x30 Security Screw
x8
M8 Lock washer
x2
M6 Saddle Strap
x2
Pin Torx bit
Weight of heaviest part
BS EN 1176
(1.1)
(1.3)
14kg (Duo)
Ground Fix
Pair Small Red
Beaters X2
Components:
1. Attach the steel legs to
the base of the instrument
with the M8x25 security
screws and lock washers.
(1.1) (See Assembly Guide)
2. Attach Ground Fixing
posts to legs(1.2) (See
Ground Fix Post Installation
Sheet)
3.Excavate 2 holes for the
Steel legs 200mm diameter
by 400-550mm deep
depending on Key stage, in
desired location upon
(1.2)
decision from customer.
4. Locate (lower) legs into
holes making sure they are
vertical and level prior to
concreting in place.
5. Once happy with location
of the Instrument, fill holes
using rapid hardening
concrete. Be sure to
compact concrete around
legs and leave to dry
according to manufactures
guidelines.
6. Attach the 1 pair of
beater to the saddle strap
on the leg. (1.3)
x4
x8
M10x200 Bolt
M10 Nut
1.5m
1.5m
KS1 – 700mm
KS2 – 850mm
KS1,2
Ground Surface
KS2 - 400mm
KS1 - 550mm
Spares available form
percussionplay.co.uk
or from
your local distributor
Install Instrument
with 1.5m free
space (from widest
point) around it.
20 Kg