Canon imageCLASS MF269dw Service Manual page 283

Hide thumbs Also See for imageCLASS MF269dw:
Table of Contents

Advertisement

TESTMODE (Service mode for test print, operation check, etc.) > SCAN (SCAN Test Mode)
■ ADJUST
● ADF-ADJ
TESTMODE (Service mode for test print, operation check, etc.) > SCAN (SCAN Test Mode) > ADJUST > ADF-ADJ
DF-SPEED
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
Supplement/Memo
DF-OFFSET
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
Supplement/Memo
■ ADFTEST
TESTMODE (Service mode for test print, operation check, etc.) > SCAN (SCAN Test Mode) > ADFTEST
SPEED
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
2-SIDE
Detail
Adj/Set/Operate Method
Related Service Mode
Supplement/Memo
Adj vertical scan magnification: ADF
To adjust vertical scan magnification ratio at ADF stream reading.
As the value is changed by 1, the margin on the leading edge of paper is changed by 0.1 %.
+: Image shrinks in the vertical direction
-: Image expands in the vertical direction
Enter the setting value, and then press OK or Apply key.
-30 to 30
0.1 %
0
Same as FEEDER > ADJUST > LA-SPD
Adjust the reading start position: ADF
To adjust the reading start position at ADF stream reading.
As the value is changed by 1, the margin on the leading edge of paper is changed by 0.1 mm.
+: Leading edge margin becomes smaller. (An image moves to the leading edge.)
-: Leading edge margin becomes larger. (An image moves to the trailing edge.)
Enter the setting value, and then press OK or Apply key.
-30 to 30
0.1 mm
0
Same as FEEDER > ADJUST > DOCST
Specify ADF Motor rotation speed
To specify ADF feeding speed.
Select the setting value
STDFAX
FINEFAX
SFINEFAX
RGB 300dpi
RGB 150dpi
Gray 300dpi
Gray 150dpi
Mono 300dpi
Mono 150dpi
TESTMODE > SCAN > ADFTEST > 2-SIDE
TESTMODE > SCAN > ADFTEST > COUNT
TESTMODE > SCAN > ADFTEST > START
Specify DADF duplex mode
To specify ON/OFF of duplex mode.
ON and OFF is switched each time OK key is pressed.
TESTMODE > SCAN > ADFTEST > SPEED
TESTMODE > SCAN > ADFTEST > COUNT
TESTMODE > SCAN > ADFTEST > START
DADF model only
275
8. Service Mode

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageclass mf264dwImageclass mf267dw

Table of Contents