Canon imageCLASS MF269dw Service Manual page 261

COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > MISC-P > OUTPUT
CNTR
Detail
Use Case
Adj/Set/Operate Method
Caution
ERR-LOG
Detail
Use Case
Adj/Set/Operate Method
Caution
SPEC
Detail
Use Case
Adj/Set/Operate Method
Caution
KEY-HIST
Detail
Adj/Set/Operate Method
Caution
Supplement/Memo
CRG-LOG
Detail
Adj/Set/Operate Method
Caution
Output counter report
To output counter values that indicate usage of functions (reading, recording, communication and
copy).
When checking the counter
Select the item
When executing report output, be sure to load paper in the Pickup Tray and remove paper on the
Multi-purpose Tray.
If there are papers on the Multi-purpose Tray, report will not be output even papers are placed in
a cassette.
Output error log report
To output jam log and error log.
When checking error log
Select the item
When executing report output, be sure to load paper in the Pickup Tray and remove paper on the
Multi-purpose Tray.
If there are papers on the Multi-purpose Tray, report will not be output even papers are placed in
a cassette.
Output spec report
To output the current machine specifications including country, model information, ROM version.
When checking the current machine specifications such as country, model information, ROM
version.
Select the item
When executing report output, be sure to load paper in the Pickup Tray and remove paper on the
Multi-purpose Tray.
If there are papers on the Multi-purpose Tray, report will not be output even papers are placed in
a cassette.
Output key log report
To output the key log up to the time the send task was input (by pressing the Start key).
Select the item
When executing report output, be sure to load paper in the Pickup Tray and remove paper on the
Multi-purpose Tray.
If there are papers on the Multi-purpose Tray, report will not be output even papers are placed in
a cassette.
Fax model only
Output toner/drum ctrdg log dtl print
To output the toner/drum cartridge log information (serial number, remaining level, installed hours,
etc.) stored in an equipment.
Select the item
When executing report output, be sure to load paper in the Pickup Tray and remove paper on the
Multi-purpose Tray.
If there are papers on the Multi-purpose Tray, report will not be output even papers are placed in
a cassette.
253
8. Service Mode