Canon imageCLASS MF269dw Service Manual page 264

COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > SPLMAN
LEFT-DUP-CST
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
SPL14159
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SPL27354
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SPL32620
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SPL10249
Detail
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Adjust left edge margin 2nd of 2-sided
As the value is changed by 1, the margin on the left edge of paper is changed by 0.1 mm.
+: Left edge margin becomes larger. (An image moves to the right.)
-: Left edge margin becomes smaller. (An image moves to the left.)
When adjusting the left edge registration margin of the 2nd side of the 2-sided printing at the time
of pickup from the Pickup Tray.
Enter the setting value, and then press OK or Apply key.
50 to 150
0.1 mm
92
USB device ID setting
To set whether to fix the USB device ID to "000000000000".
This machine tries to install drivers every time PC is connected. When the USB device ID is fixed,
the machine consider the same PC is connected, so there will be no need to install the drivers
many times.
Enter the setting value, and then press OK or Apply key.
0/1
0: Do not fix
1: Fix
0
PC-less update, RMDS env setting
To set the PC-less update and RMDS environment setting.
Enter the setting value, and then press OK or Apply key.
0 to 5
0: Production environment/Release environment
1: Production environment/Staging environment
2: Maintenance environment 1/Release environment
3: Maintenance environment 1/Staging environment
4: Maintenance environment 2/Release environment
5: Maintenance environment 2/Staging environment
0
PC-less update setting
To set switching to enable/disable PC-less update
When changing the setting of PC-less update
Enter the setting value, and then press OK or Apply key.
0/1
0: Disable
1: Enable
1
Setting at Toner Cartridge error
To set whether to display the error screen when a non-genuine toner cartridge or a toner cartridge
which memory cannot be read is installed.
Enter the setting value, and then press OK or Apply key.
When set to "1", the error screen is displayed and printing is paused.
0/1
0: Do not display
1: Display
1
256
8. Service Mode