Canon imageCLASS MF269dw Service Manual page 258

COPIER (Service mode for printer) > ADJUST (Adjustment mode) > CCD
FBTAR-BW
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
DFTAR-R
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
DFTAR-G
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
DFTAR-B
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
DFTAR-BW
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
■ PANEL
COPIER (Service mode for printer) > ADJUST (Adjustment mode) > PANEL
TOUCHCHK
Detail
Use Case
Adj/Set/Operate Method
Supplement/Memo
Shading target value (B&W) entry
To enter the shading target value of B&W at copyboard reading.
Enter the setting value, and then press OK or Apply key.
128 to 384
296
COPIER > DISPLAY > CCD > FB-TARGET-BW
Shading target value (R) entry: ADF
To enter the shading target value of RED at ADF stream reading.
Enter the setting value, and then press OK or Apply key.
128 to 384
354
COPIER > DISPLAY > CCD > DF-TARGET-R
ADF model only
Shading target value (G) entry: ADF
To enter the shading target value of GREEN at ADF stream reading.
Enter the setting value, and then press OK or Apply key.
128 to 384
349
COPIER > DISPLAY > CCD > DF-TARGET-G
ADF model only
Shading target value (B) entry: ADF
To enter the shading target value of BLUE at ADF stream reading.
Enter the setting value, and then press OK or Apply key.
128 to 384
334
COPIER > DISPLAY > CCD > DF-TARGET-B
ADF model only
Shading target value (B&W) entry: ADF
To enter the shading target value of B&W at ADF stream reading.
Enter the setting value, and then press OK or Apply key.
128 to 384
355
COPIER > DISPLAY > CCD > DF-TARGET-BW
ADF model only
Adjust coordinate position: Touch Panel
To adjust the coordinate position on the Touch Panel of the Control Panel.
When replacing the liquid crystal panel.
Select an item, and press 5 rectangles on the display in order.
Only for Touch Panel model.
250
8. Service Mode