Canon imageCLASS MF269dw Service Manual page 260

COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > CLEAR
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > CLEAR > HIST
JAM-HIST
Detail
Use Case
Adj/Set/Operate Method
ERR-HIST
Detail
Use Case
Adj/Set/Operate Method
■ MISC-R
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > MISC-R
SCANLAMP
Detail
Adj/Set/Operate Method
■ MISC-P
● OUTPUT
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > MISC-P > OUTPUT
SRVC-DAT
Detail
Adj/Set/Operate Method
Caution
SYS-DAT
Detail
Adj/Set/Operate Method
Caution
Supplement/Memo
SYS-DMP
Detail
Adj/Set/Operate Method
Caution
Supplement/Memo
Clear jam log
To clear jam logs.
When clearing jam logs
1) Select the item, and then press OK or Start key.
2) Turn OFF/ON the main power switch.
Clear error log
To clear error logs.
When clearing error logs
1) Select the item, and then press OK or Start key.
2) Turn OFF/ON the main power switch.
Execute Scan Lamp activation operation
To execute the scanning lamp activation operation (CIS LED R -> G -> B -> all of RGB - > OFF).
Select the item
Output sys data list/sys dump list
To output the system data list/system dump list.
Select the item
When executing report output, be sure to load paper in the Pickup Tray and remove paper on the
Multi-purpose Tray.
If there are papers on the Multi-purpose Tray, report will not be output even papers are placed in
a cassette.
Output system data list
Service software switches and parameters which are used for FAX function are mainly output as
a report.
Select the item
When executing report output, be sure to load paper in the Pickup Tray and remove paper on the
Multi-purpose Tray.
If there are papers on the Multi-purpose Tray, report will not be output even papers are placed in
a cassette.
Fax model only
Output system dump list
Service data including number of communications, number of receiving pages and sending pages,
number of recording papers, number of errors are output.
Select the item
When executing report output, be sure to load paper in the Pickup Tray and remove paper on the
Multi-purpose Tray.
If there are papers on the Multi-purpose Tray, report will not be output even papers are placed in
a cassette.
Fax model only
252
8. Service Mode