Husqvarna 325L Workshop Manual page 20

8. Push the cable into the spark plug cap.
9. Use the pliers or a screwdriver to align the spring
with the hole in the spark plug cap.
WARNING: Be very careful to prevent
damage to the spark plug cap. A damaged
spark plug cap can cause an electrical
shock.
20 - Repair instructions
6.11.6 To examine the ignition module
If there is no spark, do the procedure that follows to
examine the connection between the spark plug cable
and the spark plug.
1. Remove the starter unit. Refer to
the starter unit on page 14 .
2. Examine the connections for damage that are
unserviceable because of dirt or corrosion. Examine
the cables for damage. Make sure that the cables
are in their correct positions.
3. Examine the distance between the flywheel magnet
and the ignition module with an air gap gauge. Refer
Servicing data on page 6 for the correct distance.
to
To disassemble
1023 - 001 - 24.04.2019