Safety; Safety Definitions; General Safety Instructions; Symbols On The Product - Husqvarna 325L Workshop Manual

2.1 Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage to
the product, other materials or the adjacent area
if the instructions in the manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.

2.2 General safety instructions

WARNING: Read the warning instructions that
follow before you use the product.
The service center that repairs the product must have
safety devices that obey local regulations. Warnings and
cautions are used to point out specially important parts
of the workshop manual.

2.3 Symbols on the product

WARNING! This product is dangerous.
Injury or death can occur to the operator
or bystanders if the product is not used
carefully and correctly. To prevent injury
to the operator or bystanders, read and
obey all safety instructions in the
operator's manual.
Please read the operator's manual
carefully and make sure that you
understand the instructions before use.
Use approved hearing protection. Use
approved eye protection.
Make sure that long hair is put up above
your shoulders.
the product can cause objects to eject,
which can cause injury.
Maximum speed of the output shaft.
Keep a minimum of 15 m / 50 ft distance
to persons and animals during operation
of the product.

4 - Safety

2 Safety
Use only flexible trimmer line.
Do not use metal cutting elements.
The arrows show the limits for the position
of the handle.
Choke.
Refuelling.
Start/Stop switch.
Primer bulb.
The rating plate shows the
serial number. yyyy is the
production year, ww is the
production week and xxxxx
is the serial number.
yyyywwxxxxx
1023 - 001 - 24.04.2019