Muffler; Air Filter - Husqvarna 325L Workshop Manual

8. Attach the starter unit to the crankcase with 8
screws.

6.8 Muffler

6.8.1 To disassemble the muffler
1. Remove the 3 screws and remove the muffler.
2. Remove the gasket behind the heat shield.
3. Remove the screw and remove the spark arrester.
6.8.2 To clean and examine the muffler
1. Clean all components. Clean the contact surfaces of
the gasket, the heat deflector and the cylinder.
2. Examine the spark arrester for damage.
3. Examine the muffler and the muffler holder for
damage.
16 - Repair instructions
4. Examine the gasket for damage.
5. Replace all damaged parts.
6.8.3 To assemble the muffler
1. Assemble the muffler in the opposite sequence of
disassemble the muffler on page 16 .

6.9 Air filter

6.9.1 To remove the air filter
• Remove the carburetor cover and remove the air
filter.
6.9.2 To clean and examine the air filter
1. Put on protective gloves.
2. Spray the foam filter (E) with air-filter oil.
3. Put the air filter in a plastic bag.
4. Rub the plastic bag to supply the oil equally across
the air filter.
5. Push the unwanted oil out of the air filter while in the
plastic bag.
6.9.3 To assemble the air filter
1. Assemble in the opposite sequence of
the air filter on page 16 .
To
To remove
1023 - 001 - 24.04.2019