Test Leads; Supplied Potential Test Leads; Supplied Current Test Leads - Amprobe MO-100 User Manual

Test Leads

The test leads supplied with the instrument are suitable for connecting to
conductors up to 17mm in diameter or bus bars 17mm tick. There will be,
instances where the item being measured require larger jaws, and the user is
advised to make up his own leads. There will be occasions when longer leads
are required due to the geometry of the item being tested. Some guidance
notes should as sit in the assembly of such leads:
• Length of the potential leads should be as short as possible.
• Insulated 16/0.2mm, tinned copper wire is recommended.
• The two potential leads should have the same length to minimize
inaccuracies due to unbalance.

Supplied Potential Test Leads

• P1+ test lead is of Red color, shrouded, 4mm safety plug which at one
end have a crocodile (alligator) clip for connection to the resistance to
be measured. The other end plugs into the meter (4mm shrouded) color
coded sockets.
• P2 - test lead is of Blue color, shrouded, 4mm safety plug which at one
end have a crocodile (alligator) clip for connection to theresistance to
be measured. The other end plugs into the meter (4mm shrouded) color
coded sockets

Supplied Current Test Leads

• C1+ test lead is of Green color, shrouded, 4mm safety plug which at one
end have a crocodile (alligator) clip for connection to the resistance to
be measured. The other end plugs into the meter (4mm shrouded) color
coded sockets.
• C2 - test lead is of Black color, shrouded, 4mm safety plug which at one
end have a crocodile (alligator) clip for connection to the resistance to
be measured. The other end plugs into the meter (4mm shrouded) color
coded sockets.
8