Use Of Rubber Test Leads Holster; Auto Power Off Function - Amprobe ACD-400 User Manual

ACDC-400

4.1.3. Use of rubber test leads holster

One of the accessories is a rubber holster that, inserted on the clamp, can hold one of the
two test leads, like showed in Fig. 3
Fig. 3: Use of rubber test lead holster
This rubber holster has a very practical use. It allows the user to perform the
measurements with both test leads while, more easily, observing the value on the display
at the same time.

4.1.4. AUTO POWER OFF function

In order to extend the battery life, the clamp switches off 30 minutes after the last rotary
switch or button actuation.
When this function is enabled the symbol is displayed.
To disable this function select the OFF position then rotate the selector to any position
while the R-H key or ZERO key is pressed.
Turning OFF and ON the clamp the AUTO POWER OFF will be re-enabled.
EN - 8