SOMFY Tilt & Lift 25 RTS Central Instructions Manual page 9

Readjusting the lower end limit
1) Press the down button to bring the
motorised product to the end limit to be
readjusted.
2) Press the Up and down buttons at the
same time until the motorised product moves
up and down.
3) Press the Up or down button to move
the motorised product to the new desired
position.
4) To confirm the new end limit, press the
my button until the motorised product moves up and down.
2.4.3. adding or deleting a RTS control point
Find an RTS control point (A) programmed
in the motor.
Press and hold the RTS programmed control
point (A) PROG button or the motor PROG
button until the motorised product moves
up and down: the motor is in programming
mode.
Quickly press the RTS control point(B)
PROG button to add or delete: the motorised
product moves up and down and the RTS
control point is programmed or deleted from
the motor.
2.4.4. Erasing the control point from the memory of the motor
To delete all the programmed control points,
press and hold the motor PROG button until
the motorised product moves up and down
twice.
All the control points are deleted.
Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013
1
3
PROG. PROG.
A B
C
2
4
C
C
x2
x3
9