Whyte Inter-Grip Seat Clamp; General Whyte Lubrication; Torque Settings; Notes - Whyte 29 CS Supplementary Service Manual

WHYTE Service Manual

5.2: WHYTE INTER-GRIP SEAT CLAMP

Figure 8: Capscrew Lubrication
Lubrication
Item Description Lubricant
Interval
M6 x 30mm SKF LGEP2 or Castrol Spheerol AP3 or Finish
Once a Month
1
Capscrew Line Teflon White Lithium Complex grease

5.3: GENERAL WHYTE LUBRICATION

For the correct lubrication regime and maintenance of all parts on a Whyte bicycle, please
refer to the specific component manufacturers detailed instructions bundled with this man-
ual or for further information visit the specific manufacturers website.

6.0: TORQUE SETTINGS

Torque explained: If no suitable Torque Wrench is available a Torque of 5 lbf.ft can be obtained by ap-
plying a force of 5lb, with a Spring Balance, to the end of a spanner, 1 Foot in length.
IMPORTANT: For all other torque settings, refer to the specific manufacturers information
bundled with this manual, or alternatively, refer to the specific manufacturers website for
further information.

7.0: NOTES

2016 Edition 1 Page 15