Table of Contents
Advertisement
EN
10
SAFETY PRECAUTIONS AND INSTRUCTIONS
If an extension cord is used to connect the equipment to the mains, it must not be lighter than the
equipment's own power cord.
Check the condition of the power and extension cord (if used) on regular basis for any signs of damage or
wear. If so, don't use the equipment again.
Never disable the safety switch.
6. SAFETY PRECAUTIONS AND INSTRUCTIONS
ATTENTION! When using electric garden tools, observe preventive safety measures to eliminate the risk
of fi re, electric shock or health impairment.
IMPORTANT – Safety, health and environment
To ensure safety when using this electric tool, it's vital that you should understand and observe the
equipment's safety operation rules.
Before using the product, please also read this user's manual carefully and save it for further use.
Before using the product for the fi rst time, please read the instructions below and make sure that:
- The power cord jacketing is clamped securely.
- The extension cord jacketing is not damaged.
- The cable(s) is (are) routed to eliminate the risk of damage and/or unplanned shutting the equipment
off.
- The line cable in unwound from the coil completely to avoid overheating.
ATTENTION! Please read carefully!
When an equipment powered by alternating voltage is turned on, a short-time voltage drop (in V) may
occur. Such drop may also affect other equipment (such as light fl ickering). However, if the AC power
supply's impedance (Zmax) is less than 0.40 Ohms at 50 Hz, such malfunction cannot occur. For more
detailed information, please contact your electric energy supplier.
Please use an extension cord for outdoor use.
If you use your garbage shredder outdoors, always use extension cords designed for outdoor applications
to connect the appliance to the mains.
Keep the work area clean!
Mess and dirt may lead to accidents.
Take care to ensure appropriate working conditions.
Do not expose your electric tools to rain.
Do not use your electric tools in rain or wet weather.
The working area must be well lightened.
Do not use your electric tools in fl ammable or explosive environment.
FZD 4007-E
Advertisement
Table of Contents
