EN
8
Assembling the lawnmower
5. ASSEMBLING THE LAWNMOWER
IMPORTANT INFORMATION: Carefully unfold the lawnmower handle, being careful not to pinch or
damage the lawnmower's control cables.
1. ASSEMBLING THE HANDLE
1. Insert the handle's bottom part (Fig. 2 - point 1) in the relevant holes on the mower (see the arrow) and
secure with screw and nut.
2. Attach the top part of the handle (Fig. 2 – point 2) to the bottom part of the handle using the included screws
with quick coupler and wing nuts (Fig. 2 – point 3).
IMPORTANT: After loosening the quick coupler, it is possible to comfortably adjust the height of the
handle and to select the most comfortable work position.
2. INSTALLING THE HANDLE PANEL
Attach the plastic handle panel using the included screws (Fig. 3).
Fig. 2
Fig. 3
FZR 5124 BV