EN
8
Assembling the lawnmower
5. ASSEMBLING THE LAWNMOWER
IMPORTANT INFORMATION: Carefully unfold the lawnmower handle, being careful not to pinch or
damage the lawnmower's control cables.
1. ASSEMBLING THE HANDLE
1. Insert the bottom part of the handle (Fig. 2 – point 1) into the respective holes on the lawnmower (see arrow)
and secure in place with screw and nut.
2. Adjust the handle height for the lower installation according to the selected position, Pic. 2b.
3. Attach the top part of the handle (Fig. 2a – point 2) to the bottom part of the handle using the included screws
with the quick coupler and wing nuts (Fig. 2c).
Fig . 2a
2. INSTALLING THE HANDLE PANEL
Attach the plastic handle panel using the included screws (fi g. 3).
Fig . 2b
Fig . 2c
Fig. 3
FZR 5611 B