Controlling Travel; Application Range For The Petrol Lawnmower; Mowing With The Grass Catcher; Mowing With Rear Discharge - Fieldmann FZR 5124 BV Instructions For Use Manual

CONTROLLING TRAVEL

The travel is controlled using the travel lever (Fig. 7, point 1). When the lever is pulled to the handle, the
lawnmower will start moving. To stop, release the lever. The lawnmower is equipped a travel speed control. You
can change the travel speed with the lever on the handle panel (Fig. 1, point 14).

APPLICATION RANGE FOR THE PETROL LAWNMOWER

Mowing with collection of grass clippings in a grass catcher
Mowing with rear discharge of grass clippings

Mowing with side discharge

Mulching - mowing with loose placement of grass clippings on the lawn
Caution! Do not use the mower on slopes with an inclination of more than 20°, otherwise motor seizure
might occur!

MOWING WITH THE GRASS CATCHER

When the grass catcher is installed, grass clippings are discharged into the grass catcher
Caution! In case of poor mown grass catching, increase the mowing height and check if the lawn is wet.

MOWING WITH REAR DISCHARGE

Without the grass catcher installed, the grass catcher cover serves as a defl ector that directs the movement of
the grass clippings towards the ground. A row of grass clippings is thereby formed behind the lawnmower
MOWING WITH SIDE DISCHARGE
Caution! Attach and remove the side discharge defl ector only with the engine turned off.
Use your hand to lift the side discharge cover and attach the side discharge defl ector (Fig. 8). In order to mow
with side discharge, it is necessary to install a mulching plug into the discharge chute.
PETROL LAWNMOWER
Controlling and operating the lawnmower
Fig. 8
Fig. 7
USER'S MANUAL
11 EN