Activating Do Not Disturb - Avaya J169 Instructions For Use Manual

Procedure
1. Press
2. Scroll to
• Select
• OK
• The corresponding line key
3. Scroll to the Call forward - NA feature, and press one of the following:
• Config
• OK
4. Configure the following fields:
• Destination: Enter the call forwarding number.
• Number of rings: Enter the number of rings after which the call is forwarded.
5. Press Save.
6. Press Enable.

Activating Do Not Disturb

About this task
Use this procedure to prevent the phone from ringing when you get a call. When the Do Not
Disturb (DND) feature is activated, all incoming calls are sent directly to the voice mail, and the
caller hears a busy tone.
Additionally, you can configure a ring reminder to get a short ring burst when the incoming call is
sent to the voice mail.
Before you begin
Ensure that the system administrator activates the DND feature for your extension.
Procedure
1. Press
2. Scroll to
• Select
• OK
• The corresponding line key
3. Scroll to Do Not Disturb feature. Press one of the following:
• Select
October 2019
Main Menu.
Features, and press one of the following:
Main Menu.
Features, and press one of the following:
Using Avaya J169/J179 IP Phone in an Open SIP environment
Comments on this document? infodev@avaya.com
Activating Do Not Disturb
71