Mounting The Front Fork - Etac Transit Manual

Mounting front fork
- Pull out the cover plug (A) and unscrew the retaining nut
(B). Pull out the front fork and put the bevelled washer (C)
and the bearing on the new fork.
- Mount the washers and bearings in the front fork at-
tachment as illustrated. Washer (C) is mounted with the
bevelled side towards the front fork. Washer (D) on top
under the retaining nut.
- Tighten the retaining nut until it cannot be turned any
more. Loosen it 1/2-1 turn. The spring washer then has
the correct tension. It reduces the risk of the castor star-
ting to "wobble".
- Mount the cover plug.
5. Settings
A
B
D
C
19 mm