Etac Transit Manual page 13

Legrest
The legrests can be removed/swung to the side if needed.
Lockable legrests by pushing the red button (A).
To fasten the lockable legrests press down on the red button (A),
put the legrest into place and release the button. The legrest is
now locked (B).
Before lifting the wheelchair, check that the
legrests are locked.
Push handles/bow handle, height adjustable
Loosen the knobs (A). Set desired height. Ensure that the
push handles are locked in the correct position, tighten
the knobs.
Ensure that the knobs are properly tightened.
This is especially important if the chair is to be
lifted with the user sitting in it.
Make sure the safety button pops out below the
bracket.
The bow handle must be removed before the
chair can be folded.
Attendant brake (service brake)
• Brake while in motion by pulling the brake lever
upwards.
User manual
Attendant brake (parking brake)
A
• Activate the parking brake by pulling the brake lever
upwards and pressing in button A.
• Release by pressing the lever upwards.
13
Etac / Transit / www.etac.com
A B