Footrests; Calf/Heel Strap; Armrests - Etac Transit Manual

Foot supports
Adjust the height until you are sure that your feet are
supported and your thighs are resting on the cushion.
For outdoor use the footrests should be raised 4-5 cm
above the ground.
Adjusting the angle
Adjust the footrest angle, so the ankles are at 90°.
Changing the depth of the foot supports
Adjust the depth of the foot supports by switching the
right and left foot support. Do not forget to adjust the
angle.

Calf/heel strap

• Adjust the length so that your insteps rest on the

footrests.

Armrest (adjusting)
• Loosen the screw on the inside of the armrest plate.
• Set the required height and tighten the screw.
• The high position of the armrests supports and relieves
pressure on the back better than a lower position.
User manual
Settings seat comfort
Adjusting the height
Loosen the knob and pull out the screw. Set the height.
Assemble the screw and knob and tighten firmly.
5 mm
15
Etac / Transit / www.etac.com
Never stand on the footrests
as there is a risk of tipping!
3 mm