Husqvarna GARDENA SILENO city Workshop Manual page 18

®
3. Only for GARDENA
frame.
4. Only for McCULLOCH
the clips with a screwdriver.
5. Remove the hatch by using a flat screwdriver.
18 - Repair instructions
®
and McCULLOCH , lift up the
®
, remove the cap by pushing
6. Detach it on one side and then pull it out by hand.
Note: The springs for the hatch differ between the
®
models. GARDENA
springs. McCULLOCH
7. Locate the 4 positions where the body system is
attached.
8. Push the special tool down in 1 of the 4 positions,
and pull the body up.
®
and Husqvarna have two
®
has one spring with sleeve.
1067 - 001 - 16.04.2019