Cleaning And Descaling - Bartscher Aurora 22 Manual

6. Cleaning and descaling

WARNING!
Before cleaning, disconnect the device from the power
supply (unplug!) and leave to cool off.
Never clean the device with use of pressurized water jet.
Protect the device from the water penetration.
Regular cleaning
CAUTION!
Always, prior to cleaning, moving or transporting the machine,
empty the water container.
Drain the water after the device and water have cooled down.
o Due to the fact that trace amounts of
water remain in the unit's tubes,
container, etc., if the unit is to be
unused for a longer period of time it is
necessary to shake out any remaining
water with the help of the water
release screw (10) located on the
rear wall of the element, pour out the
water, and clean the unit.
o During shorter periods of non-use it is sufficient to run clean water through the
machine, without adding coffee.
o If the unit has gone for a longer period without use, it is necessary to repeat steps
1 - 8 („Preparation of coffee") without pouring coffee.
o The thermo jug (6), pump tube and filter basket (3) should be rinsed following
each use.
o Use soft cloth only and make sure you never use any kind of abrasive agents,
which could scratch the metal.
o After the cleaning procedure you should use a soft and dry cloth to wipe dry and
polish the surface.
- 36 -
Drain screw