Cleaning And Descaling - Bartscher Regina Plus 90T A190196 Instruction Manual

6.2 Cleaning and descaling

Daily cleaning
o Clean the device after each use.
o After use, wash the device with hot water and a mild, commercially available
detergent for coffee makers. Clean also the filter basket, riser pipe and cover.
Please observe the instructions of the manufacturer.
o Dry these items with a soft cloth.
o The water container should be cleaned of all sediments and coffee remnants.
It can be cleaned with a mild abrasive cleaner and cleaning pan.
o Wipe the surface of the coffee maker with a damp cloth and then dry with a soft cloth.
o To clean the faucet after use, fill the coffee maker with warm water and drain it
through the faucet.
Weekly cleaning
o If the device is used daily, it is necessary to thoroughly clean the spout mechanism
once weekly, or less frequently in case of less intensive use.
o In order to clean the device unscrew the tap lid and remove the closing cone. Wash all
parts in warm water with the gentle washing agent. Use appropriate bottlebrush to
clean the tap and its connection with the coffee maker.
CAUTION!
You must not insert the brush into the assembled tap as it may damage the
closing cone.
All parts of the tap should be rinsed with cleaned water and thoroughly dried.
o
Reassemble the tap.
When required, the level indicator (a) may be cleaned
o
with use of appropriate bottlebrush.
Unscrew the upper screw (d), disconnect the glass
pipe (b) and remove the upper seal (c). Insert the
bottlebrush to the glass pipe (b) and clean it
thoroughly with use of warm water and gentle washing
agent. Thoroughly rinse with clean water.
Then reassemble the level indicator. Pay attention to
correct positioning of the lowe and upper seal (c).
- 32 -
c
d
b
a
c